CALL TOLL FREE

877-590-8665

CNC Routers Talent 510 Series $49,780.00

CNC Routers Talent 510 Series $49,780.00

1.0 Machine Configuration: The NEW CNC Router is a fast and precise, three axes moving bridge style machine. A moving bridge machine is ideal for a smaller shop because the footprint is only slightly bigger than the work size of the machine.

1.1 The X axis moves the spindle head left to right across the bridge.

1.2 The Y axis moves the bridge front to back.

1.3 The Z axis moves the spindle up and down.

2.0 Machine Construction: The NEW CNC is designed to provide a solid foundation for high quality machining, but keep the cost affordable for smaller budgets.

2.1 The main machine base uses.25” and ½” thick structural steel tubing welded into a single piece. A weldment is preferable to a bolt together base because it does not need to be periodically re-squared. The frame is supported by 6 legs with adjustable leveling feet.

2.2 The Bridge legs are a 5/8” thick steel weldment. It is cross braced in order to stiffen the assembly and dampen vibration.

2.2.1 A steel bridge is superior to aluminum in its ability to suppress and absorb the forces created during cutting.

2.3 Each axis of motion is supported on 4 sets THK high precision hardened and ground linear guide ways. THK is the inventor of this style of linear guide, with worldwide manufacturing, including a 400k ft2 plant in Hebron, OH. THK rails are known for long life and high speed performance.

2.3.1 The linear guides and ball screw is auto lubed from a programmable central oiling system.

2.4 The X and Y axis motion is via a rack and pinion drive system. The German made helical rack is hardened for extremely long life and ground for very good accuracy. A helical pinion has several gear teeth in contact with the rack at all times. It is the contact of multiple teeth that eliminates the backlash and improves the running accuracy of the machine.

2.4.1 Further the Y axis uses a dual drive, one for each side of the bridge.

2.5 The Z axis is driven by means of a hardened antibacklash ballscrew.

2.5.1 The ball nut is lubricated by the central lube system.

2.5.2 The Z axis has a dual cylinder pneumatic counterbalance to allow very fast and accurate Z-axis positioning.

2.6 This is a fully closed loop servo system using Yaskawa motors & drives. Yaskawa is the largest servo maker in the world, and is renowned for their higher performing and zero maintenance system. Further the motors are very smooth running and have very good acceleration and deceleration curves.

2.7 The table top is a made from phenolic top machined into a 4 zone vacuum plenum. The plenum acts to spread vacuum across the table surface, and is ideal to use with flow thru type fixturing.

2.8 The spindle is an air cooled 10 hp HQD ISO 30 Auto Tool Changer (ATC). It is fully programmable from 3000~24,000 rpm.

2.9 The tools are stored in a “Ride Along” carousel. A Ride Along carousel is a faster chip to chip time than any other design, and requires must less travel, thereby minimizing wear and tear and the machine.

3.0 The OSAI “OPEN”CNC control is the latest industrial grade CNC control from the $300 million industrial giant Prima. It is a standard G-Code with a simple and straight forward user interface. It fully supports the closed loop positioning of the high powered servo motors used.

3.1 The NEW CNC also uses a manual pulse generator (MPG) to aid in setup. This is used for manually moving the machine, in any of the 4 axis, to help set zero points.

3.2 The machine also includes a tool touch sensor that measures and sets the tool length.

4.0 SUMMARY OF SPECIFICATIONS:
Description Specification
Working Table Size 63 Inches (1600mm) x 126 Inches (3200mm)
Table Type 4 Zone Vacuum Vacuum Pump
7.5 hp Rotary Vane vacuum pumps and inlet filter
Z axis Stroke
15.7” (400mm) Rapid Traverse Speed (max)
3181”/min X-Y Z-350”/min
Spindle Type
10 HP Air Cooled ISO 30 spindle With 8 tool Auto Tool Changer
Dust hood included
Installed Dimensions ( l x w x h) 146” x 92” x 86”
Total Machine Weight 6500 lbs w/o pump
Overall Vacuum Pump Size 34 x 18 x 13 each
Total Vacuum Pump Weight 325 lbs. each
Dust Inlet 6”
Voltage (Machine) 220v/60 Hz/3 phase 65 amps
Voltage (Vacuum Pumps) I
ncluded in above
Control Box
Separate cabinet w wheels

Categories

Cart Contents

Your cart is currently empty

Subtotal: $0.00

View Cart & Checkout

Arrow Tooling ©Copyright 2024 Arrow Tooling   -   Powered by SunShop "Shopping Cart Software"

  • american-express
  • discover
  • mastercard
  • visa