CALL TOLL FREE

877-590-8665

Amana Tool DT120T14-20 Carbide Tipped Ditec 2000 Adjustable Type Scoring 120MM D x 12 x 2T x ATB, 20MM Bore, Scoring Set

SKU: DT120T14-20
Price:
$191.54

Qty: - +

Used on panel saws or sliding table saws with separate scoring units for chip-free cuts on both sides of the material. Adjustable scoring sets consist of two 12-tooth saw blades with shims to adjust the kerf width (2.8mm to 3.6mm). Used in combination with Amana Tool&39;s® industrial saw blades with standard kerf. With longer lasting Ditec™ carbide tips.

Instructions for grinding:

• For maintenance grinding, use fine grit (D400 to D600) diamond wheels. To match the factory grind, use a slower than normal feed rate.

• Damaged teeth can be replaced, however, replacing of a large number of teeth will, of course, shorten the life of the saw blade.

• Since the carbide in the DITEC™ is harder than other carbides, it is critical that you protect them from “thermal shock” if an adjacent tooth is replaced. Heat absorbed during the brazing process will seriously degrade the DITEC™ carbide.

D
Diameter
TeethBoreB Kerf mmC Plate mmD diam mmGrindMachine
120mm 12 X 2 20mm 2.8-3.6MM 2.0MM (X2) 120MM ATB Altendorf, Martin, Mrozek

Categories

Cart Contents

Your cart is currently empty

Subtotal: $0.00

View Cart & Checkout

Arrow Tooling ©Copyright 2024 Arrow Tooling   -   Powered by SunShop "Shopping Cart Software"

  • american-express
  • discover
  • mastercard
  • visa